Lowongan Maintenance Quality Control di PT Jasa Angkasa Semesta

Requirements:

• High school graduate and/or Bachelor degree from any major
• Candidates must have minimum 2 years experience in workshop/garage area 
• Competent in Microsoft Office (Excel, Word & PPT)
• Excellent in English Verbal and Written
• Have knowledge about all GSE unit at PT. JAS, Tbk
• Good in Engineering ability
• Willing to work in International Airport Soekarno-Hatta, Tangerang

Responsibilities:

• Establish a satisfying quality control system for GSE and other equipment maintenance to fulfill the regulation requirement of the governmental authority, international aviation-related institutions such as ICAO and IATA, airlines and local airport authority as well.
• Lead a counter part team on certification program conducts by governmental authority, as well as GSE quality audit, starting from the preparations of document, tools, coordination among the involved departments, and finalize the certification report.
• Verify that both PM-II (preventive maintenance) and PM-III (repair works) job instructions are technically correct. Verification shall be based on the higher level of technical guidance or procedures where applicable, such as manual book, commissioning report, certification report, accident / incident investigation report, technical evaluation, etc. 
• Approve functionality test specification for each equipment type according to vendors manual book, AHM Series-9000 and refined with historical record of equipment. The test specification shall cover all-important functionality of the equipment.
• Approved the proposal of revision on technical job instructions of PM-II and PM-III applied, check and verify the reason for revision so that the revision will adequately fulfill the latest requirement.
• Inspect and verify that all items on the PM-II (Workshop Department) instructions have been satisfactorily and correctly carried out and verify that the entire equipment unit will safely operate and within the standard requirement of equipment operation, perform running test as necessary.
• Inspect and verify that all items on the PM-III instructions (Repair Department) have been satisfactorily and correctly carried out and verify that the entire equipment unit will safely operate and within the standard requirement of equipment operation, perform running test as necessary.
• Inspect and verify any other maintenance work that is closely related to the equipment technical and physical performance.
• Monitor the expiry date of all instrument calibration validity and initiate re-calibration request.
• Create a comprehensive quality inspection report for all inspection made, and compile in the regular weekly, monthly, semi annually or annually basis, in the form of Equipment Quality Report.